Pymeter Digital Temperature Controller Dual Probe Reptile Thermostat Controlled Outlet for Terrarium Heat Mat Heating…

Each Socket supports Heating/Cooling Mode:

1. Heating Mode: set ON Temperature = OFF Temperature, 《falls back》to ON Temperature or lower >>>>>>>>>>!!!!!!!!!!!!!!!!!!!!

For example: set 1On to 20°C, 1OF to 30°C, socket 1 will turn on when current temperature only turn on again when current temperature falls back to 20°C or lower!

2. Cooling Mode: set ON Temperature > OFF Temperature, socket 1(2) turn on when current Temperature >= ON Temperature, turn off when current Temperature 《rises back》to ON Temperature or higher >>>>>>>>>>!!!!!!!!!!!!!!!!!!!!

For example: set 2On to 35°C, 2OF to 25°C, socket 2 will turn on when current temperature >= 35°C, and turn off when current temperature falls to 25°C or lower, and will only turn on again when current temperature rises back to 35°C or higher!

3. Temperature Difference Alarm(d7): if set difference to 5°C, when temperature difference between sensor1 and sensor2 is over 5°C, will alarm with sound “bi-bi-biii”;

4. Power-On Delay(P7): set P7 to 1 min, socket1/2 won’t turn on until 1 min countdown since last power off.

5. Temperature Calibration(C1,C2): Sensor1/2 Calibration, -10°C~10°C(-18°F~18°F). 「Don’t compare it to common inaccurate thermometer or temp gun!

Please Calibrate with ice-water mixture (0℃/32℉) if necessary!」

Make sure this fits by entering your model number.
✓【Dual Probes】Quite different from other thermostats, Pymeter temperature controller is equipped with 2 waterproof accurate sensors, make it possible to control 2 sockets for heater and cooler at the same time or separately.
✓【Dual Sockets】Each outlet has independent temperature controlled switch and it intelligently identify heating or cooling mode via ON & OFF set-point, it is very easy and flexible to keep target at desired temperature range.
✓【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, this is very helpful to keep target safe from malfunction of any one probe. Cooking fishes NEVER happen!
✓【Enhanced Functions】Power-Off Memory; Power-On Delay; Temperature Calibration.
✓【Widely Used】Pre-wired, just plug in and play, suitable for various applications: kimchi refrigerator, garage freezer, carboy heater, home brew kit, chicken coop water heater, water chiller, swamp cooler, seedling heat mat, reptile heating pad, heat lamp, oven thermostat, beer brewing kit, fermenter fermentation bucket, heat mat for plants, grow tent heater etc.